home *** CD-ROM | disk | FTP | other *** search
-
- I N S T A L L A T I O N
-
-
- 1. Move the GMC-BBS drawer to the desired hard disk position.
-
- 2. Click on the InstallLibs Icon and install the required xpr libraries.
- If they are already existing the version will be checked and if
- necessary an older version will be overwritten after confirmation. If
- the installed version is actual no installation will be made.
-
- 3. Click on the InstallScripts Icon and install the required scripts. If
- they are already existing you have the possibility to install new or
- changed scripts again after confirmation.
-
- In case you are using OS 1.2 or OS 1.3 you need to create the directory
- "SYS:Prefs/Env-Archive". After that add the following lines to your
- "startup-sequence" and reboot your computer before you install the
- scripts.
-
- C:MakeDir RAM:ENV
- C:Assign >NIL: ENV: RAM:ENV
- C:Assign >NIL: ENVARC: Sys:Prefs/Env-Archive
- C:Copy >NIL: ENVARC: RAM:ENV ALL QUIET
-
- 4. Start Assign_BBS before you start the mailbox the first time or insert
- the following line to your s:user-startup or s:startup-sequence if you
- have installed the BBS on DH0: "Assign GMC-BBS: DH0:GMC-BBS". After that
- you need to reboot your computer before you start the BBS.
-
- 5. Check the Tool Types of the icon BBS.PRG.
- Default: SCREENMODE=NTSC DEVICE=serial.device UNIT=0 CONFIG=bbs.config_e
-
- 6. If you run the BBS from disk remove the write protection so that the
- system files and user data can be saved. Otherwise the program saves the
- files to the Ram Disk without any message. Moreover the system time of
- your computer have to be correct to make a suggestive working of the
- mailbox possible.
-